Build Report: Revell’s 1/48 F/A-18E Super Hornet

It’s not often that you find a kit that is almost embarrassingly cheap AND an excellent kit. Revell’s 1/48 scale F/A-18E is one of those rarities.

The kit’s price- originally- was about $22, which for a modern tooling of a jet is quite remarkable. But because the model is on the shelves of Hobby Lobby, an American chain of craft stores, the famous 40% off coupon can be applied, meaning you get the kit for less than $14.

Kit: F/A-18E
Manufacturer: Revell
Stock Number: 85-5850
Scale: 1/48

And the few warts, and I mean few, found in the box seem much less painful when seen in that light.

My goal was to build this out of the box as much as possible, and with the exception of the decals, I did just that.

The cockpit, while not quite what you’d expect to see from Tamiya or Eduard, paints up very nicely. The seat is not bad at all, and even includes some simple molded in belts. With careful painting, it looks good. Of course, a resin seat might jazz it up a bit, and can certainly be afforded because of the whole <$14 kit price thing.

Decals are provided for the cockpit’s MFDs, both “on” and “off” options being provided. I went with the “off” option. Apart from a small part added to the back of the ejection seat, courtesy my spare parts box, the cockpit is out of the box.

The wheel wells are extremely “busy”, and take to painting, drybrushing and washes nicely. The landing gear are nicely detailed, though a bit soft in places. A bit of sanding and shaping squared those away.

The air intakes have some clever engineering that attempts to hide all seams when viewed from normal viewing angles and distances, and with careful assembly, it does a reasonable job. (Remember- $14 kit.)

Assembly of the fuselage and wings is mostly a drama free event. Some seam work is needed. For most modelers, an application of Mr. Surfacer and a wipe down with an alcohol soaked cotton bud will do nicely. If you’re wanting to be a bit more thorough, some sanding and filling will need to be done on the perimeter of the lower edge joins along the wings and LERXs. The fit is fine, but there is a small seam that is not actually on the real airplane. (I chose to minimize it and just treat it like a panel line.)

With the airframe assembled, I painted it, using a combination of Tamiya XF-80 for the lowers, and XF-19 for the uppers. A variety of fading, shading, and panel line techniques were employed, including airbrushing, artists oils, mechanical pencils, and enamel washes.

After looking over the kit decals, I decided to go with and aftermarket set. The kit decals are not the best quality in terms of printing. They have an almost “dot matrix” look when viewed closely. Of course, they could certainly be used. They performed well when applied. (I used a few of the stencils.) Still, I wanted an operational, low visibility look to it, so I went with a Super Scale decal set. (To be sure, they weren’t much better than the kit decals in terms of printing quality.)

Getting on the final fiddly bit wasn’t too difficult, though this is an area of most builds I become my own worst enemy. But it all fits well. I do think the wingtip mounted Sidewinders are a bit poor looking, and if you really notice things like that, others from your spares box (or aftermarket) may be in order.

Still… $14. Keep that in mind.

Overall, this is a good kit I can commend to any skill level of builder including young builders. More advanced modelers may want to address the decals, seat, and wingtip missiles a bit, but a good result can be had straight from the box.

When it’s all weighed out, I think this is probably the best fun to price ratio I’ve ever found in a kit!

7 responses to “Build Report: Revell’s 1/48 F/A-18E Super Hornet”

  1. Hey Jon, I just stumbled on your site searching for reference pics of this Revell f-18 kit. It’s the first kit that I’ve worked on since I was 15…25 years ago!

    I’ve enjoyed it so far and it certainly has tested my rusty abilities with some of the fitment issues.

    I also used aftermarket decals, but I agree, it’s a nice, fun kit for the price.

    Keep up the good work!


  2. Yikes! Every time I turn around, there’s another product I don’t have. What the heck is Mr. Surfacer? Is it a way to restore the original surface to the plastic?


    1. It’s a surface primer/filler that I find very useful. It comes in various thicknesses, with Mr. Surfacer 500 being the thickest, and Mr. Surfacer 12 the thinnest. Each can be thinned with Gunze leveling thinner and airbrushed, so it can be used a a primer. But it can also be “painted” on with a brush, and used as a filler, either being smoothed down with a cotton bud soaked in alcohol, or sanded down.It works great for very small hairline cracks in wing joins, etc. I don’t use it to take the place of a proper putty filler for larger stuff, as it’s not the ideal tool there. But for smoothing out joins, priming, etc., it is a very useful product to have around. It’s made by Gunze Sangyo. Check your hobby shop or favorite online retailer and I’m sure you’ll find it. Please feel to contact me through the this site’s contact form if you have further questions. Thanks for reading!


  3. Hey just wondering how I got the intakes on. The round part only fits one way into the wholes on the body but when u go to turn it right side it flexes to the point it breaks the glue seams. Suggestions.


    1. Hey Shayne,

      Unfortunately I have a very poor memory, and for the life of me I can’t recall much about getting the intakes mounted. I don’t recall any trouble, really. But it may just be the “fog of plastic”. 🙂

      Given your description, the most likely course of action I’d take would be to go through a gradual test fit process: Place the intake trunk in the fuselage, get it aligned with the forward edge, and then do a visual check for places that don’t fit. I’d then do some careful sanding/cutting as needed to make room for it, doing just a small bit at a time. Keep making adjustments until you get a trouble free fit.

      I apologize for not having anything more comprehensive to offer – I just don’t recall much about the fit, or getting those in.

      Thanks again for reading my work, and if you’re on Facebook, please consider following me there! (




  4. Hello there. I’m building this kit and enjoying the process after many years away from the hobby. The model you assembled here looks amazing. I’m trying techniques on this build that I never tried. I wanted to know what color was used for panel line wash? Was there something you used other than an air brush technique to acquire the variance of grey color?


    1. I don’t recall, actually. Generally I use a dark gray color for gray jets though. The main thing I look for is contrast.



Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Website Powered by

%d bloggers like this: